Prepare
Start with dry concrete
Remove loose debris before applying EXIMO to the stain.
EXIMO concrete cleaner
Remove Oil Stains
From Concrete
Without Pressure Washing
- No pressure washing
- No rinsing
- Works below the surface
Before
After
✓ After 4 weeks
✓ After 4 weeks
Before
After
✓ After 4 weeks
✓ After 4 weeks
Before
After
✓ After 4 weeks
✓ After 4 weeks
Before
After
✓ After 4 weeks
✓ After 4 weeks
Results
See it in action
Why EXIMO
Oil Goes Deeper Than the Surface
Concrete is porous. Oil can settle below the visible surface, where surface-only cleaning may not reach it. EXIMO uses bioremediation to break down oil-based stains over time.
Real-world results
See the Difference Over Time
✓ After 4 weeks
Results vary by stain age, depth, surface condition and application frequency.
How EXIMO works
Simple Application
Apply
Use a light amount
Apply EXIMO directly to the stained concrete. Use 1/4 cup to cover 55 sq ft.
Distribute and leave
Let EXIMO keep working
Distribute evenly until no visible excess remains. Do not rinse.
If the surface is sealed, painted or coated, test an inconspicuous area first. Review the complete instructions for your preferred method:
Where to use EXIMO
Industry Uses
EXIMO supports concrete-cleaning programs across commercial and residential environments.
-
Restaurants / Food Service
-
Commercial Properties
-
Parking Garages
-
Residential Properties
-
Auto Repair Facilities
-
Hotel and Hospitality
Frequently asked questions
Before You Apply
Helpful answers about application, coverage and ongoing use.
How often should EXIMO be applied? +
Application frequency varies by site, traffic and oil accumulation. Apply EXIMO weekly to treat new and existing stains. Tough stains should be treated as needed; an average fuel location may apply it once a week.
How much EXIMO should be applied per application? +
Coverage varies with the concrete's surface texture, and rougher surfaces may require more product. On average, 1/4 cup covers up to 55 square feet. Start with less product and add more only as needed.
What preparations are needed before applying EXIMO? +
Clear away debris and dispose of trash. Concrete should be dry before application. Follow all company procedures, product-label directions and safety guidance.
Do I have to block off the entire facility when applying EXIMO? +
No. Section off only the work area needed to protect personnel. After application, the area is ready for use, so one section can be treated while other areas remain open.
How do I know when I am finished applying EXIMO? +
Application is complete when the product is evenly distributed and no visible excess remains. If product remains, continue distributing it until it is fully dispersed.
The application is creating a lot of dust. Am I doing something wrong? +
Dust can be a sign that too much EXIMO was applied. Use the minimum amount needed for the treatment area. Do not apply EXIMO during extreme winds or gusty conditions.
How is EXIMO better than pressure washing my location? +
EXIMO works below the visible surface within porous concrete and does not require pressure-washing equipment or rinsing. Application can be completed one section at a time without closing the entire operation.
Is it true that EXIMO should be applied to new locations before opening? +
Yes. Applying EXIMO before opening allows it to begin working within the pores of the concrete and start treating oil as it appears.
Is EXIMO just cosmetic or does it really clean the concrete? +
EXIMO works below the surface to break down oil within porous concrete. Cleaning begins after application and can continue for up to 30 days. Under some conditions, the oil stain may temporarily turn white while the process is active.
Ready when you are
Ready to Take on Tough Oil Stains?
Review the application steps, then pick up EXIMO from the display.
Review the 3 Steps